The all new Special Edition DYS motors have landed, the high performance brushless motors from DYS that provides 1.1kg of thrust from each motor when using a 5045 Bull Nose prop and a DroneLab 4s battery. This is the cost effective 2205 motor that provides constant performance for beginner or pro FPV flyer.
The DYS SE2205 motors use N52 Magnets, the highest grade magnets possible, to give improved acceleration and improved stopping power. With the help of NMB Bearings the SE2205 provide constant, smooth performance with higher sustained RPMs during high kv.
These are the new design of motors that allow you to solder wires straight to the motor, these work perfectly with the DYS ESCs that also have pads or ESCs that come with wires for you to easily solder straight to the motor.
This is just a single CW DYS Motor and not a pair.
1Kg+ Thrust with 4s battery and recommend propeller combo.
Highest Grade N52 Neodymium magnets.
New design with imported NMB bearings.
14mm Prop Shaft allows virtually any prop with 5mm hole.
2 Lock nuts and 2 sets of motor screws for 3mm and 4mm thick frames.
M5 spanner for tightening your locking nuts.
Weight: Approx. 30g with wires
Wire AWG: 20AWG
Stator Diameter: 22mm
Stator Height: 5mm
Shaft Diameter: 3mm
Motor Diameter: 27.7mm
Motor Height: 33mm
Prop Adapter Shaft Thread: M5
Input voltage: 3S-5S
3s setups 12a ESC
4s setups 20a ESC
5s setups 30a ESC
1x DYS Pro SE2205 2550KV CW Motor
4x M3 x 5mm Bolts
4x M3 x 7mm Bolts
2x CCW M5 Nuts
3x 12cm 20AWG Wire