Home > Shop by Category > Transmitters & Receivers >

FrSky X4R-SB - 3/16 Channel Receiver w/ SBUS
FrSky X4R-SB - 3/16 Channel Receiver w/ SBUS


 
Our Price: £26.99

Stock Status:(Out of Stock)
Product Code: 4703
Qty:

Description
 
These have installed the latest EU LBT Firmware.

FrSky's X4R-SB receiver features 3 PWM outputs (normal servo) and 1 SBUS port that carries all 16 channels. Plus the exciting new Smart Port and a traditional A2 port are all located on the side port of the receiver. A FrSky FBVS can be connected to the A2 port for simple voltage monitoring.

Smaller than the X6R, but still packing 16 channels and the new Smart Port that supports the new hub less digital sensors! Or, connect the new vario, and then connect the old hub to use existing analogue sensors.

S-BUS allows you to have access to all 16 channels. Alternatively, you can use something like the FrSky S-BUS Decoder, this will allow you to add 4 normal servo outputs (PWM). You can also connect S-BUS servos directly to the S-BUS line. Just "Y" in as many S-BUS devices as you need.

Note: This version of the X4R does include the S-BUS output and offers 3 channels via PWM. No PPM output.

Specification:
Operating Voltage Range: 4V-10.0V
Operating Current: 100mA@5V
Operating Range: >1.5km (Full Range)
Firmware Upgradeable

Compatibility:
FrSky Taranis, Taranis Plus, & XJT module

Average Rating: 2 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
Disappointed October 21, 2016
Reviewer: mellanie green from GODALMING, Surrey United Kingdom  
Took a week to arrive, not good when I had paid for next day delivery.

Was this review helpful to you?