The Hellhound 210 is a custom frame designed with one thing in mind- racing. Every cut has been made with the intention of ensuring this is the perfect racing pedigree drone frame. Designed in the UK by London FPV champion Matt Hellier, this frame is intended only for those totally serious about drone racing.
The Hellhound 210 is ultra simple, with a two piece construction. The main plate is a highly rigid 4mm thick plate with all the fat trimmed right off. The battery here is bottom mounted for the lowest possible center of mass. The top plate exists only to protect your core- but gives you somewhere to mount your video transmitter, and is a handy plate to place a GoPro or similar camera.
The Hellhound 210 quad frame has standard mounting points for all standard flight controllers and motors. It is 210 sized and suits props up to 5".
In summary, this Hellhound frame is for racers. It has everything you need, and not a single unnecessary gram. It is thick enough to be robust, and firm enough to perform consistently. If you want a true racing frame, look no further.
Hellhound 210 Features:
Designed in the UK by London Champion and UK finalist Matt Hellier.
84g with steel screws
80g with aluminium screws
Full 3K Carbon Fiber
4mm single piece main plate
3mm top plate
Rear SMA hole
Camera angle cut out to allow angles to ~80*
Motor mounting holes to fit a variety of motors (M3 mounting patterns).
Bottom mount lipo, with cut strap points (suggested Lipo is a 1300mah 3 or 4s)
Support for bracketed cameras.
Top mount space for recording cameras.
210 Size. Compatible with 5" props.
1x Hellhound 210 Top Plate
1x Hellhound 210 Bottom Plate
8x Aluminium Standoffs (4x spares)
8x Steel M3x10 Screws