The B6AC is a highly popular battery charger used the world over. This version from Build-Power is a highly reliable charger capable of charging and balancing lipo batteries for drones between 2 and 6 cells, along with a whole host of other battery types.
A standard 30c 1500mah lipo battery should charge from a charger like this in around 45 minutes, or faster when using a higher quality battery. This charger can charge at up to 5 amps.
Out the box these chargers can charge one battery at a time. Balance boards are available allowing these chargers to charge as many as 6 batteries at once.
This makes the perfect battery charger for most drone users, and will work fine as the charger for the batteries we supply. It will work fine with any of our pre-built drones. These chargers plus straight into the mains using the supplied UK fused plug, and require no additional equipment or power supply to work.
The included wires allow direct charging for XT60 and Deans. Crocodile clips are included for connecting to a 12v power source if desired.
This charger is based on the original "IMAX" B6AC design by SkyRC. It has been manufactured by Build-Power. RadioC is highly confident in the build quality standards of this manufacturer, and the charger is offered with the usual warranty.
Imax B6 AC Pro Charger
UK Socket Plug
Assorted Charge Wires
Input voltage: 11-18V DC 100-240V AC
Charge power: max. 50W
Discharge power: max. 5W
Charge current range: 0.1-5.0A
Discharge current range: 0.1-1.0A
Current drain for balancing LiPo: 300mAh/cell
NiCd/NiMH battery cell count: 1-15 cells
LiPo/LiIo/LiFe battery cell count: 1-6 series
Pb battery voltage: 2V-20V
Dimension: 135mm X 125mm X 34mm