Please note this item will take 2 working days before it is shipped.
This kit is designed for those wanting to get into building drones, who need a simple, modular kit to learn the ropes with. This set is perfect for newcomers to our hobby, young and old.
This racing drone kit includes absolutely everything you need to fly, including parts to build the drone, the battery and charger, and the transmitter handset. Just add 4 AA batteries and you'll be ready to go. We've used good quality parts, making for a fast and fun 220 size quadcopter, perfect for zipping around. These quadcopter kits are easy to build, but it should be noted there are no step by step instructions so a basic understanding of electronics and an ability to use google will be required to get this built (and RadioC's staff are always on the end of the phone or livechat to assist you). You have a guarantee that these parts fit together and has been spec'd out by our technicians here in the UK. This will create a good quality racing drone capable of 40mph and greater speeds.
- Totally modular. If a part is damaged you simply swap out that part, making ongoing ownership and flight very economical even for a crash prone learner.
- Highly upgradable. The setup will work with FPV upgrades, GPS upgrades, or upgrades to motors, ESCs and bigger batteries. This drone can grow with you.
- Simple. Parts are easy to access, the frame is easy to work with, and the build process is simple and requires no special skills.
Note this kit is suitable for first person view racing. If you want to be able to upgrade to FPV later you will need a camera and video transmitter.
This is not a toy. Recommended age is 16+. While younger children could use this as a learning platform, we highly recommend responsible adults make themselves aware of the inherent dangers of drones, supervise children, and take all necessary precautions.
This kit is intended to give you the lowest possible cost of entry into the hobby, parts from us are warrantied, supported, and in UK stock for fast delivery.
We've thought of all the bits you are going to need, right down to the last obscure wire.
1x Martian ii 220 Alien Clone 4mm Carbon Fiber Frame
1x SPF3 Acro Flight Controller
4x 2204 motors (may upgrade depending on stock)
4x Pocket Rocket 20A ESCs (may upgraded depending on stock)
4x DAL 5" Bullnose Tri-Blade V2 Props
1x Drone Lab 1500Mah 3s Lipo Battery
1x 25 Cable Ties
2x Flight controller/PDB mounting stand offs
1x Velcro Battery Strap
1x Flysky FS-i6X 2.4Ghz 10CH Transmitter & Receiver
1x Imax B3 2-3S LiPo Battery Balance Charger
Flying time: 6-12 Minutes
Building Time: 1-5 hours depending on knowledge levels
Speed: Straight line speed 40~60mph (depending on 3 or 4 cell battery)
Other tools you will need to have available: Soldering Iron and solder, Hex Wrench Set with 2mm wrench, Assorted small screwdrivers.
Instructions are not included, but the build is very easy. Videos are available online, and we do offer full tech support on these quadcopter kits. Some troubleshooting tips are here.
PLEASE NOTE: The frame has changed and is no longer the pictured Diatone Carbon Blade frame.