The Martian 3 is a well rounded frame appropriate for most builders. It's light, compatible with all common parts, agile, and a great flier.
Note that this is not an original frame, but is a Chinese clone. While the quality is acceptable, the holes do line up, etc., you should expect the odd less than perfect edge. You get what you pay for when it comes to frames. Please inspect the pictures, which do show the quality of the cut quite well, and make sure you are happy with it before you purchase.
This frame comes with 4 detachable 3.5mm thick carbon fiber arms. These high strength arms should survive a fair amount of punishment. The mid section includes a mount for standard size flight controllers and PDBs. There is a mount to fit standard board cams at the front, locking them at a suitable angle. The top plate includes mounting points for the FPV transmitter and antenna.
Full 3K Carbon Fiber airframe featuring a solid 2mm main plate and 3.5mm removable arms
Aluminium hardware to enable one tool, quick swapping of arms in race pit settings, purple.
Easy grip anodised spacers
Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
Power distribution board included.
Easy Lipo Access (suggested Lipo is a 1500mah 3 or 4s)
Support for 32mm board cams as well as 26mm cams in cases.
Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session) with optional camera vibration mount (not included)
Compatible with 5"+ 6" props.
PLEASE NOTE: The flight controller is not included.
PLEASE NOTE: There is an XT-60 Male Connector included for use with the PDB