Home > Shop by Category > Flight Control Boards >

Matek FC Betaflight F405-OSD
Matek FC Betaflight F405 OSD racing drone flight control board


 
Alternative Views:


Our Price: £25.99

Stock Status:In Stock

Product Code: 3133
Qty:

Description
 
Matek have developed a good reputation in the drone community for developing high quality and original products. The F405-OSD is no exception. This flight controller offers a full fat feature list, built onto a great quality board, with a very sensible price tag. The board includes a SD slot for a blackbox, runs an F4 Chip with 32k gyro support and a 16k pid loop for the highest possible performance. They use the Betaflight OSD, are fully compatible with DShot ESCs, and use the Matek F405 Betaflight target file.

These Matek F405 boards are a standard 36mm size, with standard spaced mounting holes. Will fit any modern drone frame.

These boards are guaranteed to be genuine Matek.
MCU: 168MHz STM32F405
IMU: 32K ICM20602 accelerometer/gyro (SPI)
Support 32K Gyro update & 16K PID Loop
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
Support SoftSerial on S5 & S6
Battery Voltage Sensor: 1:10
Current Sensor: No (FCHUB-6S option)
BEC 5V & 10V: No (FCHUB-6S option)
LDO 3.3V: Max.300mA for Spektrum RX
Spektrum BIND_PIN: RX4
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
2x LEDs for FC STATUS (Blue, Red)
6x PWM / DShot outputs without conflict
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x Side-press button for BOOT(DFU) mode
1x 16pin bottom mounted FFC Slot for FCHUB-6S connection
36x36mm PCB with 30.5mm mounting holes

Included:
w/ 1x 0.5mm*16Pin 5cm Flexible Flat Cable
w/ 4pcs M3 Anti-vibration Standoffs

Average Rating: 5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
Matek FC Betaflight F405-OSD November 1, 2017
Reviewer: Anonymous Person  
Easy and good integration with Matek FCHUB-6S Hub PDB

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
good service August 1, 2017
Reviewer: Timmy FPV  
The normal fast delivery from the guys. The board is excellent quality, Matek have really done a good job. I only got a few flights in over the weekend so not sure about performance, but so far it seems smooth.

Was this review helpful to you?