Home > Shop by Category > Electronic Accessories > PDBs & BECs >

Matek v3.1 Power Distribution Board 36mm
Matek v3.1 Power Distribution Board 36mm


 
Our Price: £5.50

Stock Status:In Stock

Product Code: 7211
Qty:

Description
 
The latest technology in Power Distribution Boards has arrived from Matek, with Matek amassing a great reputation in the drone world and industry for producing extremely high quality PDBs that come as standard rich with features. The new v3.1 features all of the common requirements such as a 12v BEC that has a continuous current of 2 Amps (this output is more commonly used for a 4-6s LiPo) and a 5v BEC with a continuous current of 3 Amps that is mostly used to power receivers, flight controllers and OSDs.

The PDB is standard sizing at 36mm x 36mm, the same as most flight controllers so they can be stacked on top of each other. This PDB also comes with dedicated power outputs for your FPV camera and video transmitter, next to these power outputs features a video pass through from the "CAM" pad to the "VTX" pad.

The Matek v3.1 PDB has a 7.2 - 26DC input (2-6s LiPo), with 2oz copper and 4 layers of PCB for the BEC, Ground, VCC and a second Ground. The v3.1 comes with 4 dedicated live and ground outputs for your ESCs that can take a continuous current of up to 20A per output/ESC.


Specifications:
Band name: Matek
Item name: Matek Power Distribution Board
Dimensions: 36 x 36mm
Weight: 6.21g
Mounting holes 30.5mm square spacing

Features:
2oz copper & 4-layers PCB.
ESC & Battery solder tabs in pairs.
Solder Bridges of various voltage for Camera & VTX.
DC/DC synchronous buck regulator, Efficiency is up to 95%.
TVS(Transient Voltage Suppressor) protection for DC/DC chip.
5V & 12V Output LED indicators & Short circuit tolerant.

General:
Input voltage range (2S-6S operation): 7.2 - 26VDC
Regulated 5V and 12V outputs
LED power indicators ( 5V & 12V outputs )
4 ESC outputs

ESC outputs:

Continuous current: 20A per output
Peak current (10 seconds/minute): 30A per output

BEC 5V output:

Designed for RC Receivers, Flight controllers, OSD, and Servos.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 3 Amps
Short-circuit tolerant (10 seconds/minute)
LED (indicates voltage is in regulation, within 10%)

BEC 12V output:
Voltage: 12.0 +/- 0.2VDC
Continuous current: 2 Amps (Max.3A 10s/minute)
Short-circuit tolerant (10 seconds/minute)
LED (indicates voltage is in regulation, within 10%)

CAM & VTX voltage bridge

3S operation. choose “VCC” for 12V camera & 12V VTX, VCC=Battery Voltage.
4~6S operation, choose “12” for 12V camera & 12V VTX
3~6S operation, choose “5” for 5V camera
Video pass through from the “CAM” pad to the “VTX” pad

Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
Great value May 23, 2017
Reviewer: Iain Rutherford from Watton, Norfolk United Kingdom  
My Martian II frame has an integral PDB, but without the options power output options. The Matek PDB provides everything that I need to compliment my X-Racer flight controller and reliable power outputs for my fpv quad build.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Good comment March 12, 2017
Reviewer: Gianluca Zizzari from Northampton, Northamptonshire United Kingdom  
Have had this a while not with no trouble even been using it with 5s

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
pdb January 17, 2017
Reviewer: arran knight from Ireland  
love this pdb does everything you need its been my go to pdb for ever and never had an issue

Was this review helpful to you?