Stop wasting money on brand name ESCs, these 30a Pocket Rocket ESCs are every bit as good without the price premium. These Pocket Rocket ESCs are the perfect choice for any drone, or fixed wing application.
Armed with BL-Heli_S these Pocket Rocket 30a ESCs match all modern standards. They have an EFM8BB21 MCU, dedicated drive chips, a 3 oz gold plated PCB, TDK from Japan, and AVX from the USA. The components have been placed and soldered to an amazing standard that puts the big brands to shame. The outputs are plated solder pads rather than wires, allowing for the cleanest possible build.
These ESCs run Multishot at 48Mhz, or Dshot 600, providing the very latest in performance.
These ESCs are highly compact, so can be squeezed into even a tight drone build. They can push 30a sustained on a 4s battery.
RadioC's thrust tests done against a Little Bee 30a ESC show performance is totally on par with the very best.
Pocket Rocket 30a ESC Specifications:
- 2-6s Battery Compatibility
- EFM8BB21 MCU @ 50MHz
- Multishot compatible
- 30amp sustained, 40amp burst.
- 6g including wires.
- Dimensions: 30x20x5mm
- Power Wire: 100mm
- Signal wire: 150mm
- Mosfet: N-Channel
Pocket Rocket 30a ESC Features:
- Massive thrust potential.
- BLHeli 14 or newer.
- OneShot125 and Damped Light
- DShot 600 Support
- Firmware updates for this board can be run directly through cleanflight using an F3 based flight controller, or use an Arduino board.
These flash with the C_H_25 firmware.
Compatible with all current flight controllers, including Naze, SPF3, F4, KK, Flip etc.
Recommended setups: 2204-2208 motors, 6030/6045 props, 4s battery.