Home > Shop by Category > Motors >

RS BR2205 2300KV Motor Pair - Red
RS BR2205 2300KV Motor Pair Red


 
Our Price: £16.99

Stock Status:(Out of Stock)

Product Code: 2131
Qty:

Description
 
The RS BR2205 motors are designed for racing drones to provide the most thrust possible. With a massive 2600kv spin speed, these produce a huge amount of thrust for a budget racing drone.

Don't be fooled by the low price tag, these motors provide plenty of thrust, and are highly reliable.
Key Features:
1K+ Thrust with 4s battery and recommend propeller combo
Cooling Series Bell Design reduces motor temperature by at least 30%
Highest Grade N52 Neodymium magnets
Genuine Japanese NMB Bearings
Each Motor is Dynamically Balanced in the factory.
15mm Extended Prop Shaft allows virtually any prop with 5mm hole.
3 Lock nuts and 2 sets of motor screws for 3mm and 4mm thick frames.
Windings made from copper of high purity

Specifications:
Model: RS2205
KV: 2300KV
Height: 31.5mm
Width: 27.9mm
Shaft diameter: M5
Motor mount hole size: M3
Weight: 28 grams
Voltage: 2-4S

KV2600 With 5045 BN Max.thrust:950g

Included:
1x RS BR2205 2300KV CW - Red
1x RS BR2205 2300KV CCW - Red

Note: Silver nut is a CCW motor and CW nut. Black nut is a CW motor and CCW nut.


Average Rating: 2.5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
Excellent service, as usual. December 27, 2016
Reviewer: Andrew Stokes from Llandysul, Carmarthenshire United Kingdom  
Arrived next day, well packaged all present and correct. Fitted them to my Nighthawk X4/KissFC/4S-1300mah Drone Lab lipo with 4 blade Racecraft props and it's freaking awesome! Quiet, responsive and bucket loads of thust.......

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
Poor service December 13, 2016
Reviewer: Andrew from Newport, gwent United Kingdom  
One out of four motors doesnt spin up as the others causing uneven throttle response, only one lock nut supplied per motor instead of the advertised three and one set of mounting m3 screws and not two sets. One motor did not have the silk screen print on it, with everything thats missing or not right QC didnt do their job properly as these sets should never have left the factory ad they are.
I contacted radioc but they failed to respond.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
Can't run just one motor December 5, 2016
Reviewer: Keith Dixon from York, North Yorkshire United Kingdom  
Unable to give any type of review as radioc decided to send me one set of motors, then after a full day of trying to reach them decided to answer, guaranteed next day shipping as I was leaving the country two days later.. well motors showed up three days later. So wont be able to put these on for over a month due to poor customer service.Thanks guys..  make sure when you order more than one pair of motors, to confirm that they send all motors. Hopefully they will get their online chat service fixed too.

Was this review helpful to you?