Home > Shop by Category > LEDs >

WS2812B RGB 8 LED PCB Bar
WS2812B RGB 8 LED PCB Bar


 
Our Price: £3.99

Stock Status:(Out of Stock)

Product Code: 7101
Qty:

Description
 
This is a solid PCB with 8 WS2812B RGB LEDs.

This bar can be attached to your drone (or other application!) and will accept color commands from your Naze board or CC3D. This allows it to optionally change colors according to your drones behavior, for example fading from blue to red as you throttle up. Or it can just run through whatever pattern you want, or sit at a solid color, or really do whatever you want it to do.

The PDB gives rigidity to the LEDs, and they have predrilled mounting holes. These can be daisy chained. They require a 5v power.

Length: 54mm
Width: 9.5mm
Mounting holes width: 27mm
Mounting hole size: M3
Work Voltage: 4-5V DC
PDB Colour: Black

Average Rating: 4.5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
Super bright light bar! March 8, 2017
Reviewer: Ben from Aylesbury, Bucks United Kingdom  
Super bright, easy to program in Betaflight and the solder pads are easy to work with! Recommended!
Next day delivery as always from RadioC! Thanks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
SP EVO flight controller August 22, 2016
Reviewer: Kevin Robertson from Newton Aycliffe  
Cannot get this to work with this flight controller, what am I doing wrong. Bridged the pads on the rear of the board for ir/led and still nothing. Works well on Naze32 rev5 however.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
They work great March 26, 2016
Reviewer: Henry Howeson from West Wittering, West Sussex United Kingdom  
These work fine however one of the pins on my FC has not been soldered correctly in the factory so I cannot get them to work

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
LED PCB BAR December 9, 2015
Reviewer: Anthony Lowdon from Crewe, Cheshire United Kingdom  
Excellent well made bit of kit. Works superb with 5 volts direct from Arduino Nano. Going to put it on the FPV Racer as soon as i finish the code.

5 BIG Stars *****

Was this review helpful to you?