Special offer: Buy Today and get a FREE Ragg-E Booster Kit. This will automatically be included with your order.
The Ragg-E 200H is our attempt at creating the most rounded possible drone, with a balance of performance and toughness. This drone is lightning fast, fun, responsive, but also incredibly hard to break.
The drone comes fully built by our professional drone engineers here in the UK. It is built from the most up to date components, tuned to your requirements, and ready to bind to a receiver of your choice.
This drone was built with two things in mind- how to create the maximum amount of fun, with the minimum amount of risk of failure. Most drones you can buy don't last very long before your back in the workshop trying to figure out what you broke in a crash. This drone is designed to simply bounce off most obstacles without taking any damage. But don't worry, we didn't sacrifice performance in the name of strength! Armed with high end powerful motors, this drone shifts, and fast. high end powerful motors, this drone shifts, and fast.
This drone comes FPV ready with full camera and transmitter setup. This setup will work with any standard FPV viewing platform, including Fat Sharks, Headplays, Skyzones, etc.
This is the only drone so hard to break, that RadioC can offer a 1 year labour warranty from the date of purchase. All work that needs to be undertaken by our engineers to repair these drones will be free of charge for 1 year. Note this is labour only and any parts damaged and shipping will be chargeable*
This is not a toy, it is a racing drone. It is not recommended for children under 16 years of age, and requires adult supervision for anybody under the age of 18.
Ragg-E 200H Frame: This slim line aerodynamic frame is made from hardened plastic called HDPE which should survive even the hardest crashes. The 200-H from Ragg-E also offer security of the components as all the ESCs, flight controller, power and video transmitter are covered and inside the frame. This also means the motors are protected by being seated in the frame and so surrounded by the extremely tough and durable frame.
Emax 2205 2600KV Redbase Motors: These high KV motors are perfect for this size frame, giving you the quickest spinning speeds for your 4" props. The Motors are made with N52 Magnets which are the highest grade magnets around allowing for greater acceleration and stopping power, while keeping RPMs through 2600kv.
Pocket Rocket 20a BLHeli_s ESCs: Armed with BL-Heli_S these Pocket Rocket 20a ESCs match all modern standards. They have an EFM8BB21 MCU, dedicated drive chips, a 3 oz gold plated PCB, TDK from Japan, and AVX from the USA. The components have been placed and soldered to an amazing standard that puts the big brands to shame.
SPF3 Arco F3 Flight Control Board: This state of the art Flight Control Board is the heart and brains of the whole Ragg-E pre-build with the latest F3 chip compared to the F1 chip used in our competitor's pre-builds. What this means is that everything is running significantly faster whilst being able to do a lot more thanks to faster processing speeds and more UART ports.
DAL 4045 Tri-blade "Unbreakable" Props: Probably the best prop manufacture in thr business right now, producing great props such as the 4045 Tri-Blades that have been named "unbreakable" by the community of racers. These props will bounce back from the majority of crashes you will have as they are stiff when they need to be and bend when you need them to in a crash. These means you need less props and can normally fly for longer before changing props.
Runcam Swift 2 Camera: The Runcam Swift 2 is renowned among some of the top FPV pilots in the UK due to it's quality and some of the lowest latencies meaning you get the best quality FPV experience. Along with the strong Ragg-E frame and "unbreakable" DAL props, the camera comes in a case meaning that the durability of the 200-H pre-build is unrivaled by any other RTF racing drone on the market.
25mw* 40ch FT48X Video Transmitter: We've used this video transmitter due to it's micro size and light weight whilst providing a transmitting distance of up to 700m, allowing us to keep the overall weight down and not compromise on components as this provides you with 40 channels across 5 bands. The power output of this transmitter is user switchable to 200mw.
Note that specs are subject to change subject to stock levels, but this will almost always constitute a free upgrade. If you have any preference of components or would like a custom spec please let us know.
Note that the Ragg-E 200-H pre-build by RadioC can come in a range of colours at the moment, please see the pictures for details but there are variants of white with black and purple with yellow. Please specify in the order comments as to which one you would like, if you do not specify what colour you would like then you will be shipped a colour at random.
Facts and Figures:
Size: 210mm (Diagonal nut to nut)
Weight: 330g (Ex Battery)
Battery Compatibility: XT60 1300-1500mah 3 or 4s, use of Drone Lab or other reputable brand batteries is highly recommended.
Top Speed: 70mph on 4s 1300mah, 60mph on 3s 1500mah
Flight Time: 6-12 Minutes
Warranty: 1 year labour warranty.
Ragg-E 200H Racing Drone
Drone Lab 1500 3s battery (can be swaped to a 4s battery, leave a request in the order note if you would like a 4s)
DAL 4045 Unbreakable Props (2x Pack of 4)
Parts not included (required to fly):
Battery ChargerTransmitter and Receiver (Must be PPM or SBUS, if unsure call us or buy the RTF upgrade. Note a small receiver is required.)
Note that these can be made to work just fine with Spektrum, Futaba, Flysky, Frsky, Hitech, Walkera, and just about any other brand of transmitter. However please leave a note on your order letting us know what transmitter and receiver you intend to use so we can ensure it is set up for you.
Q. Will this work with my Spektrum or Futaba Radio?
A. Yes, but please let us know so we can set the drone up appropriately. If you'd like the receiver to fit inside, it needs to be small. Otherwise we can top mount it.
Q. The picture shows green props. Does that mean mine will come with green props?
A. No. You can request whatever colour you want. If you don't request a colour we will ship at random.
Q. Is this suitable as a first drone?
A. Yes, this is the perfect choice, as it is fast and rugged.
Q. Can I attach my Mobius, RunCam, GoPro?
A. Yes. Various 3D printed mounts are available online to suit most cameras.
Q. Does it come with LEDs?
A. No. However if you want them they are available as a modification, feel free to add them to your cart separately.
Q. Should I buy more propellers or batteries?
A. Yes. We highly recommend buying spare props in your preferred colour, and one or two extra 4s batteries.
Note picture is for illustration only.
*Notes re the warranty: Excludes water damage. Warranty void if the drone has been altered or tampered with internally in any way. The flight controllers USB header is accessible externally and you are welcome to make software alternations without voiding the warranty. Cosmetic damage is excluded. The customer will be required to pay shipping in both directions for warranty claims on crash damage.